Density: 15W Full Bridge Power Stage with Voltage/Current Demodulation for High Integrated Wireless Power Transmitter
Introduce Documents and Tools 设计资源 Samples and Purchases

The SC5004 is a highly integrated wireless power transmitter analog front end that contains all of the analog components required to implement a WPC compliant transmitter. The SC5004 integrates a full-bridge power driver with MOSFETs, current sense amplifier, bootstrap circuit, communication demodulator, linear regulator and protection circuit. The SC5004 can work with transmitter controller to create a high-performance wireless power transmitter that complies with both the WPC V1.2.4 Extended Power Profile (EPP) and Baseline Power Profile (BPP). Once an EPP receiver is detected, the transmitter will provide with up to 15W of output power. If a BPP receiver is present, the transmitter will deliver only up to 5W of output power. The system supports foreign object detection (FOD) by continuously monitoring the amount of power transferred and comparing that to the amount of received power, as reported by the receiver. In order to do this, the SC5004 measures the input DC current very accurately using a current sense amplifier. Besides, the SC5004 also supports input under-voltage lockout (UVLO), over-current protection (OCP) and over-temperature protection (OTP). These protections further enhance the reliability of the total wireless power transmitter system. The SC5004 is available in a compact 4 x 4 mm FCQFN package.


Typical Application Circuit





l  Support 5V/9V/12V input voltage

l  Support up to 15W output power

l  Integrated voltage and current demodulation

l  Integrated 5V LDO for powering MCU

l  Integrated four ultra-low Ron FETs

l  Integrated FET driver and bootstrap circuit

l  Integrated accurate current sense for FOD

l  Support various type of transmitter in WPC V1.2.4

n  BPP A11/A11a

n  BPP A6 with single coil or dual coil


n  EPP MPA5/MPA11 with additional DC-DC


l  4mm x 4mm FCQFN package



l  WPC Compliant Wireless Power Transmitter

l  Proprietary Wireless Chargers and Transmitter

Technical documentation
Release date
2021 / 07 / 16
选择全部 下载选择的文档
Samples and Purchases Sample application Contact us
Hot Products / Recommend More
2019 - 02 - 26
Typical Application CircuitEVM Featuresl  Buck charging mode supports charging functions for 1 to 4 battery in series, including trickle charging, CC charging, CV charging and charging termination functionl  Reverse boost mode operation (discharging mode)l  Wide input voltage range (VBUS in charging mode): VBAT to 36 Vl  Wide reverse output range (VBAT in discharging mode)...
2019 - 02 - 20
Typical Application CircuitEVMFeaturesl   Buck-Boost Charge controllerl   Buck-Boost Reverse Operationl   Dynamic Output Voltage Control in Reverse Operationl   Model   Wide VIN Range: 2.7 V to 40 V, 42 V Maximuml   Flexible VOUT Range: 1.2 V to 40 Vl   VOUT Short Circuit Protectionl   High Efficiency Buck-Boost Transi...
2019 - 02 - 21
Typical Application CircuitEVM Featuresl   Buck-Boost battery charging management supports 1 to 6 battery in series, including trickle charging, CC charging, CV charging and charging termination functionl   Reverse buck-boost operation output (discharging mode)l   Wide input voltage range: 2.7 V to 30 Vl   Wide reverse operation output range : 2V to 30V...
Contact us
Address:1000 Chenhui Road, Pudong New Area, Shanghai
Copyright ©2018-2020 Southchip Semiconductor Technology(Shanghai) Co., Ltd.